Spaces
Subsector / NAICS 332

Answer quote and job messages for fabricated metal shops

Fabricated metal product makers range from one-room machine shops to makers of valves, doors, tanks and tools. Their customers write with a drawing, a part number or a broken component and a deadline.

Spaces connects the messaging account those customers already use, so an AI agent can read each message and reply in the same chat, using the shop information you give it.

A friendly clay robot agent beside a phone with chat bubbles, with WhatsApp, Instagram and LinkedIn icons
Key takeaways
  • Customers of fabricators range from tradespeople and homeowners to engineers and purchasing teams, and many open with a drawing or a photo.
  • An agent can explain capabilities, materials, finishes, lead times in general terms and how to request a quote.
  • Tolerances, structural and pressure suitability, price, and late changes to a job in progress should always go to a person.
  • Intake quality matters most: a complete request saves an estimator the back and forth.
  • Spaces carries the messages, and the agent must get job status and stock from your own systems through its own tools.

The sector includes forging and stamping, cutlery and hand tools, architectural and structural metals, boilers, tanks and shipping containers, hardware, springs and wire products, machine shops and precision turned parts, coating, engraving and heat treating, and valves, bearings and other fabricated products.

Spaces handles the messages only. Your agent reaches your quoting, job and stock systems through its own tools, and an engineer or estimator makes the calls on tolerances, materials and price.

Subsector
NAICS 332
Part of
Manufacturing
Inside it
9 industry groups
Last updated
See it in your world

Here is one conversation, start to finish.

An example of how an AI agent handles a message in fabricated metal product manufacturing. The names and details are made up.

PriyaFabricated Metal Product ManufacturingAI agent
In this guide
01 / Subsector

Who writes to a fabrication business

A machine shop hears from engineers, maintenance managers and small manufacturers who need a part made, repaired or copied. A precision turned parts maker hears from OEM buyers with repeat orders and drawing revisions.

A heat treating, plating or coating shop hears from other manufacturers who send parts for processing and want to know turnaround and what finishes are possible.

An architectural and structural metals business, including metal windows, doors, railings and sheet metal work, hears from builders, architects and homeowners. They send site photos, measurements and plans.

A hardware, spring, wire or tool maker hears from merchants and distributors asking about stock, minimums and catalogue items. A valve and fittings maker hears from installers and plant buyers about specific parts and lead times.

Tank, boiler and container fabricators hear from operators who describe a need in practical terms, such as the volume, the fluid and the site. These are conversations that start broad and narrow quickly, which is exactly where an agent with a good intake list helps.

02 / Subsector

Questions an agent can answer

For job shops, the agent can explain what you make, what materials you work in, the size of parts you can handle, what finishes and treatments you offer or subcontract, the information a quote needs and how first article and repeat orders work.

It can ask for a drawing, quantity, material, finish and delivery date, and note whether the buyer needs certificates.

For catalogue businesses, it can answer questions about product ranges, sizes, finishes, pack quantities, minimum orders, where to buy and delivery areas.

A hardware maker's agent can confirm which product code matches a description, if the catalogue is in its instructions, and ask for a photo when the customer is unsure.

For architectural metalwork, the agent can book measure visits, explain the stages from survey through fabrication to installation, and collect measurements and photos. It can give honest general timing, such as that bespoke work takes longer than stock items, while a person confirms real dates.

  • Materials, process types and part size limits you handle
  • What a quote needs: drawing, quantity, material, finish, date
  • Finishing, plating and heat treatment options and turnaround ranges
  • Catalogue items, pack sizes and minimum orders
  • Opening hours, collection and delivery
03 / Subsector

What your agent needs from you

Write your capability statement in plain language: machines and process types, material range, maximum sizes, tolerance range in general terms, finishes in house and subcontracted, and the work you decline.

A customer who asks for something you do not do should get a quick, honest no or a referral, not a day of silence.

Write your intake checklists, one for each type of enquiry. Include which file types you accept and who reads them.

Say what to do with a drawing that is missing dimensions, a photo of a broken part with no spec, or a request for a part that matches an old catalogue number.

Give the agent the rules on commitments. It must not quote a price, a lead time or a tolerance unless you have given it an explicit rule or a tool. Decide whether replies are held for review.

Many shops hold quotes and letting the agent answer questions about hours, capability and file types directly.

04 / Subsector

What always goes to a person

Tolerances and fits go to an engineer or estimator. A customer who writes that a bore must be held to a particular tolerance is asking a technical and commercial question at the same time. The agent can note the requirement and pass it on.

It should not say whether it is achievable.

Suitability for structural, pressure, lifting or other safety-critical uses always goes to a person. This includes anything about boilers, tanks, valves, structural steel, ladders, railings and load-bearing fittings. The agent can quote a datasheet and say who will answer.

It should not interpret a standard or sign off a design.

Price, discounts, payment terms and disputes belong to your team. So do late changes to a job in progress, which affect machine time and cost, and any complaint about a rejected or out-of-tolerance part.

The agent should collect details and photos, tell the customer who will respond, and stop there.

05 / Subsector

A week in the shop

Quotes dominate the start of the week. Engineers and buyers send drawings on Monday morning and expect a response before the week gets away from them.

The middle of the week brings status questions, as customers check whether their parts are on the machine, at the plater or ready to ship. Friday brings urgent requests, often from breakdowns that have to be fixed before the weekend.

Seasonal patterns depend on your customers. Architectural metal sees surges in building seasons. Tool and hardware makers see peaks before retail seasons. Machine shops tied to agriculture or mining see peaks around planting and shutdowns.

An agent that replies fast to a breakdown message, asks for the part and drawing and tells the sender when a person will respond often decides which shop gets the job.

06 / Subsector

Setting it up step by step

Connect the messaging account your customers use. Spaces applies per-account limits, pacing and warm-up, and every send is safe to retry. Give your agent its key and your instruction pack.

Test with messages from your own history: a drawing with no tolerances, a photo of a broken shaft, a request for a stock item by old part number, a status query, and an angry message about a rejected batch.

Run with drafts, review the replies, and add what you find missing. Move factual replies to direct sending when you are comfortable. Keep quotes, tolerances and complaints with people.

07 / Subsector

Common mistakes

The most common mistake is making the agent sound sure about what the shop can hold. Tolerances and finishes are where jobs go wrong. Keep the agent to the capability statement you wrote.

Another is not asking for enough. A request without material, quantity or finish takes three more messages. Make the checklist firm and let the agent ask each missing item once.

A third is outreach. Spaces is for people who write to you or know you and expect to hear from you, such as a message that their parts are ready. Its Terms rule out bulk unsolicited messages and bought or scraped lists.

08 / Subsector

Is it working, and where it does not fit

Look at time to first reply and at how complete requests are when they reach your estimator. Look at how often chats are handed over, and whether the handovers are for the right reasons. Rising completeness and falling repeat questions are good signs.

Ask your estimators whether they spend less time chasing missing details, and your shop floor whether fewer status calls interrupt them.

Spaces is not a CAD viewer, a job scheduler or a quality system. If your work arrives mostly through a customer's procurement portal, chat may be a small channel.

Messages people send

What does an agent actually see?

Examples of first messages to businesses in fabricated metal product manufacturing. They are illustrations, not real conversations.

  • Maya R.Hi, can you make 20 of these brackets in 5 mm stainless, drawing attached, how soonnow
  • Tom B.My gate hinge has snapped, photo attached, can you make a new one or do you sell them2 min
  • Priya S.Where is job 4471, the plated parts, we need them Thursday9 min
  • Daniel K.Do you do heat treating on tool steel and what is the turnaround24 min
  • Amara O.We need a steel handrail for our front steps, can you come to measure1 h
  • Maya R.The last batch of shafts came back out of tolerance on the bore, what are you going to donow
  • Tom B.What is the minimum order for your M8 bolts in zinc2 min
  • Priya S.Can you hold a tolerance of plus or minus 0.01 on this diameter9 min
Illustration: the chats your agent reads through the API, with example names.
Hand-over

What always goes to a person.

Your agent answers what it can and hands the rest to someone on your team. These are the conversations to hand over every time.

01

Tolerance, fit and achievability questions on a part

02

Suitability for structural, pressure, lifting or safety-critical use

03

Price, discounts, payment terms and disputes

04

Late changes to a job already on the machine

05

Complaints about rejected, damaged or out-of-tolerance parts

06

Any request to certify, sign off or approve a design on the customer's behalf

Inside Fabricated Metal Product Manufacturing

Explore the industry groups.

Free tools

Thirty free tools for metal fabricators and machine shops.

Checklists, ready-to-send messages, scorecards and calculators. They run in your browser and send nothing anywhere.

FAQ

Questions, answered.

01Can the agent give a quote on a drawing?

It can collect the drawing, material, quantity, finish and date, and pass a complete request to your estimator. Quoting itself is usually best left to a person, or to a tool you give your agent. Spaces handles the messages only.

02Can it read engineering drawings?

It can download the attachment from the chat. How much it understands depends on your agent, and a person should check anything technical. It can log the file and ask for missing information.

03Can the agent say where a job is?

Only if your agent can read your job tracker through its own tools. Spaces does not connect to specific systems. Otherwise it should say a person will check.

04Should it tell customers whether a tolerance is achievable?

No. That needs an engineer who knows your machines. The agent should record the requirement and pass it on.

05Can it handle questions from homeowners about gates and railings?

It can explain your process, take measurements and photos, and book a measure visit. Structural and safety questions go to a person.

06Can we remind customers to collect finished parts?

Yes, for customers who ordered and expect to hear from you. It is not for unsolicited promotions.

07What about customers sending files we cannot open?

Put your accepted formats in the instructions. The agent can tell customers what to send instead, and hand over if they need help.

08Will the agent reply without a person checking?

That depends on your setup. You can hold replies as drafts or allow direct replies for low-risk topics such as hours and capabilities.

Guides

Closer guides for specific businesses.

Give your agent its first account today.