Spaces

Weekly chat review for machinery makers: parts, faults, dealers

This weekly checklist tells a machinery maker what to look at in the chats an AI agent handled, from wrong part guesses to slow handovers. It takes about half an hour and shows what to fix.

Runs in your browser. Nothing you enter is sent anywhere or saved.

Before you start

Machinery messages come in waves tied to weather, crops and building schedules. A weekly look back lets you see what owners actually asked, which parts came up again and again, and whether any urgent chat waited too long. Patterns that are invisible on a single day show clearly over seven.

You do not need to read every word. Skim the week, then use the points below to stay focused. Pick a regular slot, such as Monday before the parts desk gets busy, and keep the same list so you can see change from week to week.

Tick each one as you go. 0 of 10 done.

[ ] Read every chat that was handed to a person.
[ ] Check how long urgent stopped-machine chats waited for a person.
[ ] List the parts most often asked for and check they are in the guide.
[ ] Look for part numbers that were guessed without a serial number.
[ ] Check every safety or injury mention reached the right person.
[ ] Review warranty chats and how fairly they were passed on.
[ ] Look at questions about delivery dates for new machines.
[ ] Note new names owners use for parts or faults.
[ ] Check dealers were named correctly for each region.
[ ] Pick one answer to improve before next week.

What to look for in a week of chats

Look first at the chats that ended with a person. For each one, ask whether the agent could have answered if it had one more fact. If so, write that fact down today. If not, the handover was right.

Then look at the parts that came up more than twice. Those are the ones to photograph, label and put at the top of your guide.

Warning signs to act on quickly

If you see any of these in a week, deal with them before the weekend.

  • A stopped machine that waited more than a few hours for a person.
  • A customer who had to send the same photo twice.
  • A part sent that did not fit because the serial number was never asked for.
  • A chat where the owner asked for a person and did not get one.

FAQ

How long should the weekly review take?

About half an hour is enough for most makers. Start with handed-over chats and any marked urgent, and only read the rest if something looks wrong.

Who should do the review?

Ideally someone who knows your parts and your customers, such as the parts manager or a service lead. They will spot a wrong part or a vague answer much faster than a newcomer.

What should I do with the notes I make?

Turn each one into a plain written fact in your guide, such as a serial range or a dealer phone number, so the agent has it for the next chat and the next season.

More free tools for farm, garden, construction and mining machinery makers

Read the guide: Answer parts and dealer messages for off-highway machinery makers.