Spaces

First-reply checklist for forging and stamping shop messages

This checklist shows what the first reply to a new buyer or engineer should contain, so a quote request for a forged, stamped, rolled or pressed part gets moving at once. It is made for forging and stamping shop owners.

Runs in your browser. Nothing you enter is sent anywhere or saved.

Before you start

A buyer who messages a forging or stamping shop usually has a part, a drawing and a volume, and has written to two or three shops at the same time. The shop that replies first with sensible questions tends to be sent the drawing pack. The shop that says "send us the details" with no direction often waits days for a reply.

Read down the list and tick what your first reply already does. Each gap is a question you will ask later by phone, at a slower pace. Print it for the sales desk, or give it to whoever sets up your AI agent so the first answer asks for the right facts straight away.

Tick each one as you go. 0 of 10 done.

[ ] Thank them and name your shop in the first line.
[ ] Ask for the part number or a drawing or sample.
[ ] Ask for the material and thickness or weight.
[ ] Ask for the yearly volume and the size of each release.
[ ] Ask whether this is a new part or a repeat order.
[ ] Ask for the date they need first parts.
[ ] Ask about finishing, such as heat treat, plating or coating.
[ ] Say plainly who will give price and design feedback.
[ ] Give a realistic time for the next reply.
[ ] Keep it short, with no more than three questions.

What a good first reply sounds like

Picture a buyer who writes: can you stamp this clip in spring steel? A strong reply reads: Thanks for writing to {business}. Please send the drawing, the material and thickness, and the yearly volume, and our estimator will come back to you today.

That reply gives no price and makes no promise. It asks for three things and says who answers next. The buyer feels the enquiry is in hand, and your estimator receives a complete request instead of a vague one.

Common slips in metal shop chats

These are the first-reply mistakes that cost shops the quote.

  • Quoting a price from memory before an estimator has seen the drawing.
  • Saying yes to a delivery date before checking the press schedule.
  • Asking for the same drawing twice because nobody read the first one.
  • Replying with a long list of capabilities instead of a question about their part.

FAQ

How quickly should we answer a new quote enquiry?

Within the working day if you can. Buyers often send the same drawing to several shops, and the one that replies with clear questions first usually gets the conversation.

Can the first reply give a price?

Not safely. Price depends on the drawing, material, volume and tooling. Let your agent collect the details and pass them to your estimator, who gives the figure.

What if the customer sends only a photo of a part?

Thank them, ask for the material and yearly volume, and ask whether a drawing exists. A photo is a start, and your estimator can decide if more is needed.

More free tools for forging and stamping shops

Read the guide: Answer tooling and quantity questions for your forging and stamping shop.