Spaces
Subsector / NAICS 324

Handle trade and contractor messages for petroleum and coal products

Petroleum and coal products manufacturers sell mostly to businesses: distributors, paving and roofing contractors, fleets, workshops and industrial buyers.

Spaces connects the messaging account those buyers already write to, so an AI agent can read the message and reply in the same chat, using the product and order information you give it.

A friendly clay robot agent beside a phone with chat bubbles, with WhatsApp, Instagram and LinkedIn icons
Key takeaways
  • Most people who message this industry are trade buyers, contractors, drivers and distributors rather than the public.
  • An agent can answer routine product, packaging, order-status and site-access questions from information you provide.
  • Safety questions, quality failures, spills, pricing and contract terms should always go to a person.
  • Spaces carries the messages; order and dispatch data must come from your own systems through the agent's own tools.
  • This industry has fewer chat conversations than retail, and Spaces is not a substitute for dispatch or plant systems.

This is an honest fit with limits. Refineries rarely deal with the public, and most of their volume moves through contracts and dispatch systems rather than chat.

The value is in the steady stream of practical questions from smaller accounts, such as a paving crew asking about a load, a lubricant buyer asking about packaging, or a driver asking where to report.

Spaces handles the messages only, and a person handles anything involving safety, quality or contracts.

Subsector
NAICS 324
Part of
Manufacturing
Inside it
1 industry groups
Last updated
See it in your world

Here is one conversation, start to finish.

An example of how an AI agent handles a message in petroleum and coal products manufacturing. The names and details are made up.

Fleet managerPetroleum and Coal Products ManufacturingAI agent
In this guide
01 / Subsector

Who actually writes to this industry

Petroleum and coal products manufacturing covers petroleum refineries, asphalt paving mixture and block manufacturing, asphalt shingle and coating materials, lubricating oils and greases, and other products made from petroleum and coal. A few of these businesses sell to consumers, but most do not.

Their messages come from other businesses and the people who work for them.

At an asphalt plant, the senders are paving contractors and haulage drivers. At a roofing and coating materials maker, they are roofing contractors, merchants and the occasional homeowner who was referred.

At a lubricants and grease blender, they are workshop owners, fleet managers, farmers and industrial maintenance buyers. At a refinery or terminal, the senders are carriers, distributors and account managers who already have the plant's number.

Because chat is informal, these messages often arrive from a driver's phone or a site foreman who wants a quick answer. They are short, practical and time-sensitive.

That is where an agent helps: the answer is usually in a document someone on your team already knows by heart.

02 / Subsector

Questions an agent can answer

For an asphalt or paving mix plant, an agent can state loading hours, the mixes you produce, how to book a load, what a driver must bring, and where to queue.

It can collect a booking request with job site, mix, quantity and requested time, and pass the complete request to dispatch. It should not confirm a delivery slot unless it can read the dispatch schedule through its own tools.

For lubricants and greases, the questions are about grades, pack sizes, minimum orders, delivery areas and where to find a product data sheet.

An agent that has your catalogue summary can match a described need, such as a grease for a particular kind of equipment, to the products you list and say which one the data sheet recommends.

It should not offer its own technical opinion on whether a product suits a specific machine.

For roofing and coating materials, expect questions about colours, bundles per pallet, storage, curing times as stated on your datasheets and where to buy locally.

For a refinery or terminal, expect shorter operational questions: where a certificate or invoice copy is, who to contact about a delivery, what a gate procedure is.

  • Loading and gate hours, queue rules and what a driver must bring
  • Product ranges, pack sizes and where to find the data sheet
  • How to open a trade account and who to ask
  • Delivery areas and typical booking lead times
  • Where to find invoices, certificates and delivery notes
03 / Subsector

What you give your agent

Start with the documents your sales desk and dispatch already use: the product list, the data sheets in summary, the pack and pallet sizes, the order and delivery rules, and the contact for each kind of problem.

Write them as plain statements the agent can quote. If a figure changes with the season, say so and say who confirms it.

Tell the agent exactly what it must never say.

It must not state that a product is suitable for a specific safety-critical use, give handling or emergency instructions beyond what your own written documents say, or commit to a price, availability or delivery time that it cannot see.

Give it the phrase to use instead, for example that a person from the sales desk will confirm.

Define who is who. Contractors with an account should get one kind of treatment, unknown senders another. Your agent can use its own tools to look up an account, and Spaces only passes on the conversation.

If it cannot identify the sender, it should ask for the company name and an order or account reference and hand the chat to a person.

04 / Subsector

What always goes to a person

Anything about safety goes to a person immediately. A message that mentions a spill, a leak, a fire, an injury, a damaged container or a reaction to a product is not a customer service question.

The agent's only job is to recognise it, tell the sender a person is being alerted, and send your emergency contact details exactly as you have written them.

Quality complaints go to a person too: a load that arrived off specification, a batch of product that behaves differently from the last, a coating that failed on site. These need records, samples and sometimes lab results.

The agent can collect the batch number, delivery note and a photo, and write it up for your quality team without making any judgment about cause.

Prices, contract rates, credit limits and disputes over an invoice also stay with your team. So do regulatory and environmental questions, and any request that involves permits, certificates or how a product may be used.

The agent can say where the datasheet is, but a person interprets it.

05 / Subsector

How the week and the seasons shape messages

Asphalt and paving demand follows the weather and the roadwork season. On the first dry days after a wet spell, contractors message early and all at once, asking what is available and when a truck can come.

Roofing materials follow a similar pattern, with storms and warm seasons bringing a rush of questions. An agent can hold the line during the surge by answering routine questions and collecting complete requests for dispatch.

Lubricant and grease demand is steadier, with peaks before busy periods for farms, fleets and industrial maintenance shutdowns. Buyers ask about stock before they plan. Refinery and terminal contacts are the opposite: messages cluster around scheduled loadings, turnarounds and invoicing cut-offs.

Early morning is the busiest time, because drivers and foremen are planning the day. Early replies matter more here than in most industries, because a driver who cannot get an answer simply goes somewhere else.

Set the agent up to be fast on opening hours, queue rules and booking steps.

06 / Subsector

Setting it up

Connect the messaging account your contractors and drivers already write to. Spaces applies per-account limits, pacing and warm-up, and makes every send safe to retry. Then connect your agent with its key and give it your instruction document.

Run a test with realistic messages from your own dispatch inbox. Include a driver asking where to enter, a contractor asking for a load tomorrow, a buyer asking about a grease and, importantly, a message that mentions a spill.

Check that the agent hands over the last one at once and uses only your written emergency details.

Start with replies held as drafts for the first weeks, so your sales or dispatch staff can read them before they send. Move simple, factual replies to direct sending once you are comfortable.

Keep a record of people who have asked you to stop messaging them.

07 / Subsector

Mistakes to avoid

The biggest mistake is letting the agent sound technical when it has no authority to be. A confident wrong answer about a product's suitability can cause damage far beyond one unhappy customer.

Keep the agent to your documented statements and datasheets, and make it say when a person must decide.

Another mistake is promising delivery times. In this industry a promise to a paving crew is a commitment on a truck and a schedule. Let the agent collect the request, and have dispatch confirm.

The third mistake is using the account to push offers to a list of contacts. Spaces is for conversations that people start and for known customers who expect to hear from you, such as a confirmation of a booking they made.

Bulk unsolicited messages and bought lists are ruled out by its Terms.

08 / Subsector

Is it working, and where Spaces does not fit

Watch the time to first reply on early morning messages, and whether dispatch receives booking requests that are complete. Look at how often chats are handed over, and why.

If safety and quality chats are being handed over promptly, the agent is doing the right thing, and if it handed over simple opening-hours questions, the instructions are thin.

Ask your drivers and sales desk whether the same questions are still reaching them by phone. If so, the answers are missing from the instructions or the contractors do not know the chat exists.

Spaces is not the right tool for dispatch scheduling, plant control, safety alerts, tank or stock telemetry, or contract negotiation. It is also not a fit if nearly all your business runs through contract systems and nobody writes to you by chat.

In that case, do not force it.

Messages people send

What does an agent actually see?

Examples of first messages to businesses in petroleum and coal products manufacturing. They are illustrations, not real conversations.

  • Maya R.Morning, can we get 20 tonnes of base course mix to the Hill Road site tomorrow around 7now
  • Tom B.What time does the loading bay open and do I need to bring paperwork2 min
  • Priya S.Do you sell the heavy duty grease in 18 kg pails and what is the minimum order9 min
  • Daniel K.Where can I find the data sheet for your roofing coating24 min
  • Amara O.I need a copy of last week's delivery note for invoice matching, truck reg ends 4821 h
  • Maya R.The last drum we got seems thicker than usual, batch number is on the labelnow
  • Tom B.There is some product leaking from a pallet at our yard2 min
  • Priya S.We run a small fleet and want to open a trade account, who do we talk to9 min
Illustration: the chats your agent reads through the API, with example names.
Hand-over

What always goes to a person.

Your agent answers what it can and hands the rest to someone on your team. These are the conversations to hand over every time.

01

Any message mentioning a spill, leak, fire, injury or damaged container

02

Quality complaints about a load, batch or coating that failed to perform

03

Prices, contract rates, credit terms and disputed invoices

04

Confirmed delivery or loading slots that depend on the dispatch schedule

05

Questions on whether a product is suitable for a safety-critical or regulated use

06

Permit, environmental and certificate questions that need interpretation

Inside Petroleum and Coal Products Manufacturing

Explore the industry groups.

Free tools

Thirty free tools for fuel, asphalt and lubricant makers.

Checklists, ready-to-send messages, scorecards and calculators. They run in your browser and send nothing anywhere.

FAQ

Questions, answered.

01Does this industry get enough chat messages for Spaces to matter?

It depends on the business. A paving mix plant, lubricant blender or roofing materials maker with many small trade customers and drivers can see a steady flow of short messages. A refinery selling under contracts may see very few, and Spaces is not the right tool there.

02Can the agent confirm a delivery slot?

Only if it can read your dispatch schedule through its own tools, and many businesses prefer a person to confirm anyway. Spaces handles the messages. The agent can collect the site, mix, quantity and time and hand a complete request to dispatch.

03What should the agent do if someone reports a spill or leak?

Hand it to a person immediately and share only the emergency contact details you have written for it. The agent should not give its own safety instructions. Put this rule at the top of its instructions and test it.

04Can it answer technical questions about a lubricant or coating?

It can quote what your data sheets and product summaries say. It should not give its own opinion on whether a product suits a specific machine or job. Those questions go to your technical or sales staff.

05Can the agent send price lists to customers?

If you give it a current price list and authority to share it with account customers, it can. Many businesses keep pricing with a person. Spaces does not hold prices, and your agent only knows what you give it.

06Can we message contractors about a promotion?

Not as bulk or cold outreach. Spaces is for conversations people start and for known customers who expect to hear from you. Its Terms rule out bulk unsolicited messages and bought or scraped lists.

07How does the agent know who a sender is?

Spaces gives the agent the conversation and the sender's profile where available. Matching that to a customer account is done through your agent's own tools, or by asking the sender for a company name and reference.

08Can drivers send photos of delivery issues?

Yes. The agent can download attachments from the chat. It can log the photo with the delivery details and pass the case to a person, and it should not decide who is at fault.

Guides

Closer guides for specific businesses.

Give your agent its first account today.