Spaces

First-reply checklist for steel and metal fabricators

This checklist shows what the first reply to a new message should contain when you fabricate steelwork, sheet metal, railings or metal windows and doors. It is made for fabrication shop owners and their AI agent.

Runs in your browser. Nothing you enter is sent anywhere or saved.

Before you start

Someone who messages a fabricator is usually holding a drawing and a date. A builder needs steel on site before the crane slot goes. An architect wants a balustrade detail priced this week. If your first reply is slow or vague, they message the next shop on the list and your quote does not get a look.

Read down the list and tick what your first replies already do. Every gap is a place where your estimator, your front office or your AI agent can tighten up. Pin it near the estimating desk, or read it out at the Monday meeting before the week of quotes starts.

Tick each one as you go. 0 of 10 done.

[ ] Say who you are and what you make, in one line.
[ ] Ask for the drawing, sketch or photo of the opening or frame.
[ ] Ask for the site address or at least the suburb or town.
[ ] Ask what they need made: quantity, size, material and finish.
[ ] Ask for the date they need the work on site.
[ ] Ask who the work is for: builder, architect, installer or owner.
[ ] Explain how a quote works and roughly how long it takes.
[ ] Give standard lead times as a range, not a promise.
[ ] Say plainly that structural questions go to an engineer.
[ ] End with one next step, such as sending the plans.

What a good first reply sounds like

Picture your best estimator on the phone. They say hello, they ask to see the drawing, they ask when it must be on site. A chat reply should do the same. For example: Hi, thanks for writing to {business}. We can look at that. Could you send the plans and tell me the site address and the date you need it on site?

That is short, warm and useful. The customer knows exactly what to send, and your estimator gets an organised enquiry instead of a loose question.

Slips that lose a job

These turn up again and again in metal shop chats.

  • Quoting a price in chat before anyone has read the drawing.
  • Asking for six details in one message so the sender gives up.
  • Saying "yes, we can do that" about a connection or a span without an engineer looking.
  • Leaving a drawing unanswered over a weekend because the shop was on the floor.

FAQ

How fast should I reply to a new enquiry from a builder?

Aim for the same working day, and within an hour if you can. Builders often ask three shops at once, and the first one to reply with a clear next step usually gets the drawings.

Should the first reply include a price?

Not unless it is a standard item with a fixed price. For custom steelwork, collect the drawing, quantity and date first, then let your estimator price it from real information.

What if they send a photo with no drawing?

Reply kindly, ask for measurements and the site address, and say an estimator will review it. A photo is still a good start, and many homeowners have nothing else to send.

More free tools for steel, sheet metal and window fabricators

Read the guide: Answer builder and architect messages for your metal fabrication business.