Spaces

First-reply checklist for lighting fixture and lamp makers

This checklist shows what a first reply should contain when someone writes to a maker of light fittings or lamps. It is for owners whose agent answers designers, electricians and buyers about codes, finishes and lead times.

Runs in your browser. Nothing you enter is sent anywhere or saved.

Before you start

People who write to a lighting maker usually have a job half done. A designer is choosing between two pendants for a client meeting tomorrow. An electrician is standing in a ceiling void with a box he cannot match to an order. A quick, exact first reply keeps your fixture on the drawing.

Read down the list and tick what your first reply already does. Each gap is a place where a spec gets lost to a rival with a faster answer. Share the list with whoever covers the inbox, or hand it to your AI agent as the standard for every first message.

Tick each one as you go. 0 of 10 done.

[ ] Greet by name and say which company they have reached.
[ ] Ask for the fixture code before anything else.
[ ] Ask what the customer is: homeowner, designer, installer or shop.
[ ] Answer the question asked in the first line.
[ ] Offer the spec sheet or installation sheet by name.
[ ] Check the finish and colour temperature the customer means.
[ ] Ask for the project date or install date if there is one.
[ ] Say plainly if an item is stock or made to order.
[ ] Hand wiring, heat and shock worries to a person at once.
[ ] Finish with one clear next step.

What a good first reply sounds like

Imagine the message: I have the Arc pendant in my basket but need to know if the canopy fits a sloped ceiling. A strong reply says hello, answers about the sloped canopy from your install sheet, and asks which finish and ceiling angle so a person can confirm if the sheet is silent. It is short and it is specific.

Compare that with a reply that says thanks for getting in touch and asks them to fill in a form. The customer leaves. Your first reply is the only chance to prove you know your own range.

Slips that cost you specifications

These are the usual ones in a lighting inbox.

  • Replying with the whole catalogue instead of the one fixture asked about.
  • Guessing at a driver or dimmer match from memory.
  • Skipping the question about finish, so the wrong one is quoted.
  • Leaving a trade buyer waiting overnight when stock was the only question.

FAQ

Why ask for the fixture code first?

Nearly everything depends on it: finish options, driver type, dimensions, stock and lead time. One question up front prevents several vague exchanges and keeps the agent from guessing between similar looking fittings.

Should a first reply quote a price?

Only a list price that is written in your own price sheet. Anything for a project, a quantity or a custom finish should go to a person, and the first reply can say so honestly.

What if the customer has no code?

Ask for a photo of the label inside the fixture or a picture of the whole fitting. Older models often have no code on the box, and a photo lets your team identify it quickly.

More free tools for lighting fixture and lamp makers

Read the guide: Answer designer and electrician messages for lighting fixture makers.