Spaces

First-reply checklist for motor, transformer and switchgear makers

This checklist shows what the first reply should contain when someone writes to a maker of motors, transformers, generators, switchgear or controls. It is for makers whose customers write with a rating, a site and a deadline.

Runs in your browser. Nothing you enter is sent anywhere or saved.

Before you start

People who write to you rarely write for fun. A maintenance lead has a motor that tripped. A panel builder needs a relay by Friday. A contractor is pricing a substation and wants to know if your transformer comes in a 400 volt secondary. The first reply decides whether they stay with you or open the next supplier chat.

Read each point and tick the ones your team or your AI agent already does. The gaps are where enquiries go cold. Print it for the sales desk, or give it to whoever sets up your agent, and read it again after your first month of replies.

Tick each one as you go. 0 of 10 done.

[ ] Greet them and name your company so they know they reached the maker.
[ ] Answer the technical question in the first line, using their own numbers.
[ ] Ask for the model, or a clear photo of the nameplate.
[ ] Ask for voltage, phases, power and duty only when you do not already have them.
[ ] Ask where the equipment is and when they need it.
[ ] Attach the datasheet or drawing that answers the question.
[ ] Spot a failure or a down plant and say a person is being called.
[ ] Do not give sizing advice or protection settings in the chat.
[ ] Say who will reply next and roughly when.
[ ] Keep the message short enough to read on a phone in a plant room.

What a strong first reply sounds like

Picture your best sales engineer answering by hand. They say hello, answer the question using the customer's own numbers, attach the right sheet and ask for the one detail still missing. For example: Hi, this is {business}. Yes, that frame comes in a 400 volt option. Datasheet attached. Could you send the nameplate photo so I can check the replacement?

That reply is short, specific and moves the chat forward. Anything longer usually hides the answer.

Slips that lose enquiries

These are the common mistakes in electrical equipment chats.

  • Sending a whole catalogue when one datasheet was asked for.
  • Asking six questions in one message so the engineer gives up.
  • Quoting a lead time from memory when the factory load has changed.
  • Replying to an urgent fault in the same tone as a brochure request.

FAQ

How fast should the first reply be for a technical enquiry?

As fast as you can manage, but fastest for faults and down plants. A short reply within minutes that confirms a person is on it beats a perfect answer sent the next day.

Can the first reply include a price?

Only if you publish list prices. Otherwise collect the rating, quantity and delivery date, and say that an engineer will send a quote. Never guess a price for custom equipment.

What if the customer sends a blurry nameplate photo?

Ask politely for a clearer one, taken straight on in good light, and for the model number typed out if they can read it. Do not guess the rating from a blurry image.

More free tools for motor, transformer and switchgear makers

Read the guide: Answer contractor and plant engineer messages for electrical equipment makers.