Spaces

First-reply checklist for gas pipeline landowner and contractor chats

This checklist shows what the first reply to a new message should include when someone writes to a gas pipeline operator about the line, a crossing or a shipment. It is made for operators and their AI agent.

Runs in your browser. Nothing you enter is sent anywhere or saved.

Before you start

People who write to a gas pipeline business are rarely idle. A farmer has a drain trench booked for Monday. A fencing crew is standing in a field with a post driver. A buyer is a week from closing on a house with a marker post in the garden. The first reply decides whether they stop and ask, or carry on without you.

Read down the list and tick what your first reply already does. Each gap is a place where a customer waits, guesses or digs. Share it with your land team and with whoever sets up your AI agent, and fix the gaps before the spring digging season starts.

Tick each one as you go. 0 of 10 done.

[ ] Check the message for any sign of a gas smell, a hiss or damage first.
[ ] Say who you are and that a real team stands behind the chat.
[ ] Ask what they want to do and where, in one short question.
[ ] Ask for the address, the nearest marker post or the lot number.
[ ] Ask for the type of work, the depth and the planned start date.
[ ] Tell them plainly not to dig until the request is reviewed.
[ ] Point to the one-call locate service when the work involves digging.
[ ] Name the form or route for a crossing or encroachment request.
[ ] Give honest review times, not hopeful ones.
[ ] Ask for a phone number and the best time to call.

What a good first reply looks like

Picture a fencing contractor who writes: we are putting in posts along the back boundary at 12 Mill Lane. A good reply thanks them for asking first, asks about post depth and dates, and says clearly that nothing should go into the ground until your team has looked at it.

Notice what it does not do. It does not say the work is fine, and it does not say the work is banned. Whether a plan is acceptable is a call for your engineers, so the reply gathers facts and sets expectations.

Slips that cause trouble on the right-of-way

These are the usual mistakes in first replies to people who live or work beside a line.

  • Telling a landowner a plan is probably fine before an engineer has seen it.
  • Asking for twelve details at once, so the contractor gives up and digs.
  • Burying the do-not-dig message at the bottom of a long reply.
  • Forgetting to give a phone number for anything urgent.

FAQ

How quickly should a first reply go out when someone asks about digging near the line?

As quickly as you can, ideally within minutes. Crews work to the clock, so a fast, short reply that says wait and send details is far better than a perfect answer that arrives after the digger has started.

Can the first reply tell someone their plan is allowed?

No. Only your engineers and land agents can judge a specific plan. The first reply collects the location and details, explains the process and says a named person will come back to the customer.

What if the person writes only one line, like a question about a marker post?

Answer what you can from your published information, then ask one follow-up question about the address. Short messages are normal, so keep your reply short too and make the next step obvious.

More free tools for gas pipeline operators

Read the guide: Answer landowner and contractor messages along the pipeline route.