Spaces

Do and don't guide for your agent at an HVAC or refrigeration maker

This guide gives a heating, cooling or refrigeration maker simple do and don't rules to hand to their AI agent, covering manuals, fault codes, safety and hand-overs. It is made for owners writing their agent's instructions.

Runs in your browser. Nothing you enter is sent anywhere or saved.

Before you start

An agent follows the rules you give it. If you say nothing about gas, refrigerant or bypassing a safety switch, you are leaving the decision to chance. A short list of do and don't statements, in plain words, gives your agent clear limits and gives your engineers peace of mind.

Read each rule, keep the ones that fit your range and change the wording to match how your team speaks. Then copy the final list into your agent's instructions. Review it every few months, and whenever you launch a new product or change a safety procedure.

Tick each one as you go. 0 of 10 done.

[ ] Do ask for the model and serial number from the data plate.
[ ] Do share manuals, wiring diagrams and parts lists from your own files.
[ ] Do explain fault codes only as written in your guide.
[ ] Do say clearly when a person will take over.
[ ] Do keep replies short and put the answer first.
[ ] Don't give advice on refrigerant charge, handling or leaks.
[ ] Don't suggest bypassing, resetting or jumping a safety device.
[ ] Don't recommend a system size or capacity for a building.
[ ] Don't promise warranty cover, prices, discounts or delivery dates.
[ ] Don't continue a chat about gas, smoke or fire without a person.

Why short rules work best

A long manual of rules gets forgotten, even by people. A short list of firm do and don't lines is easier to follow and easier to check. When something goes wrong, you can see which rule was missing and add it.

Write each rule as an action, not a feeling. "Ask for the serial number" works. "Be helpful" does not.

Rules worth adding for your range

Consider adding lines like these once the basics are in place.

  • Do mention when a manual covers a different software version.
  • Do ask for site conditions on any fault that repeats.
  • Don't name a replacement part unless your parts list shows it fits.
  • Don't share drawings that are marked for distributors only.

FAQ

How long should the list be?

Ten to twenty lines is plenty for most makers. If it grows longer, group related rules together and keep the safety rules at the top so they never get lost among the routine ones.

Who should write the rules?

Someone who knows the products and the risks, usually a support engineer or technical manager, with the owner signing off. Ask the engineers who take hand-overs what they wish the agent had done differently.

Can the agent break a rule?

It can make mistakes, so check chats every week. Clear, specific rules reduce them, and a good hand-over habit means a person is close by whenever the agent is unsure about a risky topic.

More free tools for heating, cooling and refrigeration equipment makers

Read the guide: Answer contractor and owner messages for HVAC and refrigeration makers.