Spaces

Hand-over notes for spring and wire product chats

These hand-over notes show what an AI agent should write when it passes a spring or wire product chat to your engineer or estimator, so the person can carry on without asking the customer everything again.

Runs in your browser. Nothing you enter is sent anywhere or saved.

Before you start

When a chat reaches your spring engineer, every question the customer is asked a second time costs goodwill. A good hand-over note says who the customer is, what they want, what was already collected and why the agent stopped. The engineer reads it in ten seconds and carries on.

Fill in the staff name and the urgency below, then use the notes as a pattern for your agent. Each one is short and states the facts without opinion. Ask your team to tell you if a note ever leaves out something they needed.

Load question

For [staff]: customer at [business] asks if a 3 mm extension spring, 140 mm free length, will carry a person's weight in a recliner. Two pieces wanted. Photo attached. Priority: [urgency].

Custom quote request

For [staff]: new quote request. Compression spring, 2 mm wire, 20 mm outside diameter, 300 pieces, repeat likely. Drawing attached. The customer needs a price, and it [urgency].

Complaint about a broken spring

For [staff]: customer reports a spring broke after two weeks in a gate hinge. Photos of the pieces and the order number are in the chat. The customer is upset. This [urgency].

Tight tolerance request

For [staff]: customer asks for plus or minus 0.05 mm on free length, 500 pieces, stainless wire. This is beyond our usual range, so please check. It [urgency].

Urgent breakdown order

For [staff]: a factory line is stopped waiting for a replacement torsion spring. Part number from an old machine is in the chat. Please call [business] customer today. Priority: [urgency].

What a good note always holds

Four things: who, what, what you have, and why it was handed over. A note that says customer wants a spring is nearly useless. A note with wire size, quantity, photo and the reason for the hand-over saves a whole round of questions.

Keep opinion out. Say the customer sounds upset if that is plain from their words, but do not guess at causes. Leave the judgement about why a spring broke to the engineer who can inspect the pieces.

Check the notes yourself

Ask your team each week whether a note was missing something.

  • Was the customer's name and contact included?
  • Were measurements and quantity written down?
  • Was the reason for the hand-over clear?
  • Was the urgency honest, not overstated?

FAQ

How long should a hand-over note be?

Three to five short lines is plenty. It needs the customer, the request, the facts already collected and the reason for the hand-over. Anything longer starts to hide the point.

Should the agent tell the customer about the hand-over?

Yes. It should say a named person will reply and roughly when. That way the customer is not surprised when a different voice appears in the chat.

What if the note is missing something?

Tell whoever manages the agent, and add the missing item to its instructions. Within a few weeks the notes usually contain everything your engineers need.

More free tools for spring and wire product makers

Read the guide: Answer spring and wire product messages without losing the drawing.